v v belt

英 [viː viː belt] 美 [viː viː belt]

【机】三角皮带

机械

双语例句

  1. In this paper, the internal penalty function method will be applied to the optimized design of V belt transmission.
    本着机械优化设计的思想，采用内点惩罚函数法对该机构的收纸链条重新进行了一次设计，优化效果明显。
  2. Even rubber products and so on adhesive tape, conveyor belt, V belt are my factory main business products.
    平胶带、输送带、三角带等橡胶制品是我厂的主营产品。
  3. Analysis of the Surface Shape of the V sheave and the Belt Misalignment in the Metal V Belt CVT
    金属带式无级变速器装置带轮工作面形状与带轴向偏移的分析
  4. A Study of a Metal pushing V Belt Type CVT& art ⅱ: Compression Force Between Metal Blocks and Ring Tension
    金属推块V-带型CVT的研究Ⅱ&金属推块和环拉伸之间的压缩力
  5. The Effect of Notched Fan V Belt on Saving Energy
    凹口型三角风扇皮带的节能效果
  6. V-belt fatigue test is a dynamic test to examine the fatigue life of V-belt. V-belt power tester is a test installation that is accordant to the practice condition.
    V带疲劳试验是检测V带疲劳寿命的动态试验，V带功率试验机是一种与V带实际使用情况基本一致的试验设备。
  7. If the field working condition of V-belt drives is different from the power working condition, the life of V-belt will be changed.
    当V带传动实际工况与额定工况不同时，将引起V带寿命改变。
  8. The statistical test has shown that the life distribution of V belt under a specified stress fits Weibull distribution and the distribution parameters are estimated by the BLUE method in this paper.
    采用威布尔分布的拟合度检验表明，各恒定应力下的寿命均服从威布尔分布，其分布参数由BLUE估计法给出。
  9. An axial self tightening V belt driving device has been developed and used in a high speed single cylinder LPG engine test bed which is characterized by serious pulsation of torque output and high impact frequency.
    作者开发了一种轴向自动张紧式三角带传动装置，并把它应用于转矩脉动强烈，高频冲击性的高速单缸LPG发动机试验台上。
  10. Introduces the program processing method for V belt driving rated power and its incremental data as listed in the national standard table.
    介绍用公式法，实现国家标准中V带传动额定功率、额定功率增量的推荐数表数据自动检索程序化处理方法。
  11. In this paper, a new method for calculating the power ratings of ribbed V belt drives according to their expected service life is presented.
    给出一种按预期寿命来计算多楔带传动额定功率的新方法，能合理地计入传动比、带长对传动能力的影响，并易于编排计算机程序。
  12. The Multitarget Optimization Design on V Belt Wheel system of Noise Experimental Table of Main Carriage Reduction Gear
    主减速器噪声测试台胶带轮系的多目标优化
  13. It is a parameter to control belt which causes excessive vibration and provides reference for the design of V Belt.
    它是控制带发生强烈振动的参数，可供三角胶带设计时参考。
  14. The transmitting mechanisms for the metal pushing V belt type CVT were drawn in detail based on new experimental data.
    根据新的试验数据来详细叙述金属推块V-带型CVT的传动机理。
  15. In this paper, a mathematical model, of optimum design is developed for V belt drive on the basis of studying the theory and method of V belt drive design.
    本文在研究三角胶带传动设计的理论与方法的基础上提出了一种优化三角胶带传动参数的数学模型。
  16. This paper introduces the method of CAD of general V-belt transmissin applied to industry, explains the programing principles of the two subroutines of choosing V-belt type and calculating single V-belt power driven.
    本文介绍了一般工业用V带传动的计算机辅助设计技巧和方法。
  17. The V belt wheels of noise experimental table of main carriage reduction gear must suit drive ratio, be lightest in weight and least in moment of inertia.
    为降低轿车主减速器噪声测试试验台本底噪声，其传动系统采用了四对三角胶带传动。
  18. Based on the analysis of V belt drive capacity, this paper presents a method which adopts two sides tension with tightly compressing wheel to improve the load capacity of the V belt drive. It is tested to be reasonable.
    在分析V带传动能力的基础上，提出了一种对V带传动采用双边压紧轮压紧的方法，提高了V带传动的承载能力，并以试验验证了其合理性。
  19. Two equations of classical V belt drives limit velocity ( υ lim) and optimum velocity ( υ opt) are deduced on the ground of V belt power ratings calculating formula. Finally, the example is given.
    根据单根V带额定功率的计算公式，推导出求解普通V带传动极限速度υlim和最佳速度υopt的两个方程，并提供了计算实例。
  20. Transmitted torque, thrusts of driving and driven pulleys, and axial force between two pulleys were measured on a metal pushing V belt type CVT.
    本文在金属V-带推块型CVT上，测出了主、从动带轮的传递转矩和推力以及两带轮间的轴向力。
  21. Optimum Seeking Parameters for V Belt Drive with An Aid of the Computer
    计算机辅助优选三角胶带传动参数
  22. Some compared experiments are carried out with a modified V belt transmission experimental test.
    并在改装后的带传动试验台上对该传动与普通带传动进行比较。
  23. An edge cut V belt has been produced with a new technology including whole building up at constant tension, autoclave cure with rubber sleeve and cutting after cure.
    采用恒张力整体成型、胶套式硫化罐硫化、硫化后切割的新工艺研制了切边V带。
  24. Analysis of Digital Control System of V Belt Core Forming Machine
    单鼓成型机数控系统分析
  25. Constriction and self tightening function of V belt pulley is demonstrated in this paper.
    文中详细介绍了三角带轮的构造自动张紧原理。
  26. A Study of A Metal pushing V Belt Type CVT Part 1: Relation Between Transmitted Torque and Pulley Thrust
    金属V-带推块型CVT的研究（I）&传递转矩和带轮推力间关系
  27. The variation law of the wedge angle of V belt with the effect of bending stress is analyzed in this article.
    分析了V带在弯曲应力作用下楔角变化的规律，为使带楔面与轮槽更有效地接触，建立了V带带轮轮槽角与带轮基准直径的函数关系式。
  28. The TPE V belt featured simple processing technology, lower energy consumption, easy size change, flexible production, and longer service life, small elongation, accurated dimension and good wear resistance of finished product.
    采用热塑性弹性体生产V带具有工艺简单、能耗低、效率高、V带换型简便、生产灵活性好、产品使用寿命长、伸长小、尺寸准确和耐磨性好等特点。
  29. Development and application of spinning V belt pulleys in auto industry
    钣制旋压皮带轮在汽车行业的应用前景
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类